Barth Announces New Pulse Generators

Barth Electronics, Inc. is introducing a new line of 700 series high voltage pulse generators!  The New Model 731 provides pulses of < 200ps risetime, 500 volts through 3kV amplitude.  The New Model 733 provides pulses of < 200ps risetime, 500 volts through 5kV amplitude.

Previous Models 632 and 732 have been replaced by these new models.  We also continue to offer the Model 790, as shown below.

Model 731 ***NEW

Model 731 Specifications Datasheet

DESCRIPTION

The Model 731 high voltage pulse generator provides pulses of < 200ps risetime, 500 volts through 3kV amplitude, to drive into any load impedance through 50 ohm coax. The generator is capable of a minimum pulse width of 1.5ns and a maximum of 400ns. The rectangular output pulse width is determined by charge line length. HPM, impulse driven antennas, dry run simulation, and HV pulse testing are just a few of the uses for this HV pulse generator.

Model 733 ***NEW

Model 733 Specifications Datasheet

DESCRIPTION

The Model 733 high voltage pulse generator provides pulses of < 200ps risetime, 500 volts through 5kV amplitude, to drive into any load impedance through 50 ohm coax. The generator is capable of a minimum pulse width of 1.5ns and a maximum of 400ns. The rectangular output pulse width is determined by charge line length. HPM, impulse driven antennas, dry run simulation, and HV pulse testing are just a few of the uses for this HV pulse generator.

Model 790

DESCRIPTION

The Model 790 pulse generator 0 to +/- 200 volt Transient Pulse Generator is a combined latch-up sensitivity tester and a powered supply load response tester.  The latch-up generator  uses a mechanical reed switch with a custom pulse network to create the single clean fast risetime transient pulses.  The power supply load response test switches in a resistive load on a test power supply of either 10 ohms or 60 ohms observe supply recovery parameters.

Authorized Distributor of FID GmbH

Pulse Generators

beisales@barthelectronics.com

http://www.fidtechnology.com

 

Print Friendly